Trending Questions

If i wanted to change the un

gregco • 2014

If i wanted to change the unit settings either temporarily or permanent, how would i go about doing this.

Michael, Architect

Was Acad your first system? Your question seems to indicate that changing units is a big deal, which it was in Acad. If you wanted decimals of a foot or metric units you had to literally change the size of the data so that units would read correctly. In Revit, units do not change the size of anything. If you have a 2 x 2 ceiling tile, if you... 1 More Answer

Revit 2015 the new kid on th

pauly • 2014

what are the new additions of using revit 2015

What style/period is my home

pauly • 2014

This home is no beauty by any means but we feel it has potential. As you can see it is in terrible disrepair. We are interested in fixing the home up according to its original style. However, we have not been able to figure out what style it is. We were told it was... Read More

Tear it down? Never! This is a great little house. And that razor-sharp hip roof is fantastic. 1 More Answer

Rem Koolhaas, designing thro

pauly • 2014

I have been studying Koolhaas and his design process. There is indeed no clear style in his design but something that became really interesting is the fact he is said to design his architecture through his writings or books. At least that is what I can grasps from m... Read More

A few of weeks ago I began compiling a (personal/Quondam) OMA/Koolhaas dossier (4813f-4813y), and, so far, I wouldn't say Koolhaas "design[s] his architecture through his writings or books." Certain design themes from "Exodus" and Delirious New York do recur throughout the oeuvre, however. More to the point, perhaps, it may well be that the n... 1 More Answer

TidyWork

Bobby, Architect • 2015

Hi, has anyone used TidyWork for their Projects costing system. Its seems quite good and remarkably cheap.

Thanks Bobby, I am looking for its use in a number of medium sized Practices in the UK, the 10- 20 staff range. I will try it out. Joe 1 More Answer

Generic

Architecture of Decadence

miked • 2015

Just looking to start a conversation. Can anyone think of any examples of non-decadent architecture? I'm looking for examples from past or present. Also, can a 21st century architect/designer operate outside the realm of decadence, or is architecture by its nature a... Read More

^ Good one! 1 More Answer

Generic

Origins of "cluster"

Bobby, Architect • 2015

Dear all! I'm trying to track down the origins of the usage of the word "cluster" in architecture, for example as used by Smithsons (1952), in Architectural Forum (1953) or later in Architectural Review (1957). Please, does anyone know when and by whom was the term... Read More

hey y'all - that buildin is a real cluster fuck! 1 More Answer

Good News/Bad News

gregco • 2014

Good News: Wife is about 10 weeks pregnant now, can tell everyone. Bad News: Laid off today, F F F F State needs to get their butts in gear and process my license

congrats man...stay home with your kid for awhile. 1 More Answer

Duchamp to direct THE LUCKY

gregco • 2014

Marcel Duchamp has agreed to direct The Lucky Bums, a theatrical reenactment of Ford Madox Ford's The Good Soldier, starring Grace Princess of Monaco as Leonora Ashburnham, Rainier III Prince of Monaco as Edward Ashburnham, Flavia Maria Augusta as Florence Dowell, a... Read More

this is the saddest story i have ever heard rita 1 More Answer

Building Products

When I open the downloaded f

ramchandra, Architect • 2014
Antony, Manufacturer

Hi;The colours are set on a materials parameter, so you can add whatever materials and colours you like. Either in the Family or Project.Hope this helps.RegardsAntony

Would you invest company pro

Bobby, Architect • 2015

i was just googling this and wanted to find out if anyone has ever thought of investing their company's profits in stocks/bonds/other type of securities to make money for their company? Is that even legal? Just curious...

Is it legal ???? 1 More Answer

What is the type of glass th

Bobby, Architect • 2015

I am referring to the opaque glass that he used in his design because I am looking for the name( if it has one in specifically), and I haven't found it.

Pilkington Profilit 1 More Answer

Architecture

Interested in developing BIM

PABLO, Architect • 2017

Hello, I´m the architect of the technical department of Palautec omega bricks: http://www.palautec.es/default.aspx http://www.palautecbrickmanufacturer.com/products.html My Company is interested on developing BIM objects and families of our products for the intern... Read More

Liz, Modlar Administrator

Hi Pablo, Would you be able to email us at [email protected] so we can help you further?

Generic

When/why did you decide to b

James, Architect • 2016

What made you choose this field?

Carrie, Architect

As a kid, I was always fascinated by buildings whether they were monuments, ruins or modern structures. So, when I had a decision to make it came pretty naturally. I turned my passion into the career path I wanted to take.

City sponsored Papal visits

Bobby, Architect • 2015

Greetings everyone I am curious about how strict "separation of church and state" is in the United States. If a city pours several public resources into a Pope visit, from money to public road and facility closures, impacting the business of neighboring private busi... Read More

First Amendment - Religion and Expression. Congress shall make no law respecting an establishment of religion, or prohibiting the free exercise thereof; or abridging the freedom of speech, or of the press; or the right of the people peaceably to assemble, and to petition the Government for a redress of grievances. 1 More Answer

Building Products

How can I download the Comme

Joo • 2016

O que tenho que fazer para baixar esse modelo de porta

muito bom

Adding a linear hatch patter

pauly • 2014

How could i add a linear hatch pattern to my drawing for the floor layer.

Cameron, Student

add download

Using Modlar

Can I just sign in once and

MAY, Architect • 2016
Mike, Modlar Administrator

Hi May, you have to sign up to download products and then you can download as many as you want.

BIM/CAD Software

How beneficial is it to use

gregco • 2014

I have heard so many great things about utilising the MEP within Revit and would like to know how best to use it.

Finding the correct plug in

gregco • 2014

Is there a plug in for Revit that will help me with conducting a structural analysis on families.

Building Products

Why aren't there more design

Alvin, Architectural Draftsperson • 2016

Why aren't there more designs for hurricane safe homes? I have a design that is hurricane retardant and safe.

I'm not sure what you mean by hurricane safe homes but I can assure you that there are lots of building codes in hurricane zones that builders must adhere to. Although, many buildings fall through the cracks, especially in a place like Miami, where I grew up. The vernacular for buildings in this region are concrete foundations, with concrete... 2 More Answers

Building Products

Does anyone have a summary o

Kevin, Architectural Draftsperson • 2016

I am a young building technologist with no real experience in budgeting or estimating and I would like to learn. I'm looking for a summary of finish prices for walls, floors, ceilings, roofs etc. I'm not looking for accurate prices, I just want some general informat... Read More

Brian, Student

Rawlinsons Cost Guide is used for Australian estimates. You might be able to find the equivalent for your country by searching for this one as a starting point 2 More Answers

Plotting of a particular vie

pauly • 2014

I am battling to plot a particular scale sized view of a drawing in Revit. how would i be able to plot a certain scaled view.

Building Products

Where do I find the drawings

Steve, Manufacturer • 2014
Steven, Engineer

http://www.residentialshippingcontainerprimer.com/conceive%20it has CAD drawings & models, general design guidelines, and sample plans.

Building Products

Do you have a contact email

Angela, Interior Designer • 2017

Their website is not working.

Liz, Modlar Administrator

Hi Angela, I do not have an email address for them, but I did notice their website is working now. You can get in touch with them here: http://www.arcadiainc.com/contact-us

Generic

Job opportunities in San Fra

Bobby, Architect • 2015

I have completed 5 years of B. Arch. from India and worked for 2 years in Bangalore in small firm. Currently, I live in San Jose and I am permanent resident in USA and hence do not require Visa for work. I have following questions and my goal is to work in San Jose... Read More

I use to work at a firm in Santa Clara, just north of San Jose - its an Indian from Bangalore that specializes in Multi-family projects - Do you know Revit? 1 More Answer

Generic

Too many drawings, anxious t

miked • 2015

Basically getting sick of putting the word 'concept' or 'conceptual' on almost everything we do. We're in about our third year of business with less built work than we would like. We have a pretty extensive portfolio of nice drawings however, but kind of makes you w... Read More

Great topic, and I have no answer, only questions: 1 More Answer

Photos

What is your favorite airpor

Liz, Modlar Administrator • 2017
Roger, Architect

COPENHAGEN, TWA AT JFK

Rankings of Canada's Undergr

pauly • 2014

Hi all, a quick google search didn't really outline the best (and worst) of Canadian Undergraduate Architecture programs and I was hoping to get some insight from those of you in the industry who would know more. Please advise.

Thanks for no information whatsoever. 1 More Answer

Architecture

Why is download button graye

brad, Architect • 2020
Liz, Modlar Administrator

Hi Brad, could you please include a URL to the page you are finding this issue on so I can have our team look into it?

Can I download to an project

David • 2014

I would like to have my library handy when doing certain projects. The only way is to download to my computer. Is this possible. I am sure if I am doing it correctly. Please advise me on the correct method of operations. Also my I use in AutoCAD for same reason. Th... Read More

Building Products

What are the top and bottom

Danny, Interior Designer • 2017
Liz, Modlar Administrator

Hi Danny, for this question it would be best to contact the manufacturer directly. You can contact Bosch here: http://www.bosch-home.com/us/service/contact-us/contact-form-others .

Building Products

Is there a spec drawing or w

Nate • 2016

Is there a spec drawing and or written method for installation when using metal keyway systems?

Modlar, Modlar Administrator

The product installation instructions are available here: http://www.jpspecialties.com/tpvmasterspec.pdf

BIM/CAD Software

How to I download a crane fa

AMBROSO, Engineer • 2013

How to I download a crane family to use in my revit models. Any families would be ok.

Photos

material of yellow frames

Gabriel, Architect • 2019

hi there, are steel panels the material of the frames and are they attached to a concrete wall or steel frame? thanks in advace! g

BIM/CAD Software

When I download files for Sk

Tom, Contractor • 2017

This is on a Windows 10 machine. I am able to open other Zipped files/folders. The error message states that the folder downloaded from Modlar is "invalid".

Liz, Modlar Administrator

Hi Tom, The issue has been fixed, so if you download the files again, the zip files should be extractable. 1 More Answer

Architecture

Revit software for students

Richmond, Student • 2017

Hello, I am a student starting architectural drawings. Can I get Revit architecture software for free?

Liz, Modlar Administrator

Hi Richmond, I have had a look on Revit's website for you and I think it might be possible. Have a look here: https://www.autodesk.com/education/free-software/revit . Good luck!

BIM/CAD Software

How do I make a seawall usin

Michele • 2015

I was hoping there was a way to use the element to create a wall type/family. I know I can copy/rotate/mirror the individual part and make them whatever length they need to be, but that the tedious way I used to do it in AutoCAD. And I don't know if the wall created... Read More

Scott, Architect

I've seen families that do this before, basically they use the same sheet piling element, then a Loop function to keep adding them together. I'll search and see if we have one that hasn't been added to the library yet!

Architecture

I want to download revit fam

Nay, Architect • 2018
Liz, Modlar Administrator

Hi Nay, you can find Revit files here: www.modlar.com/search/bim-cad-sharing/format--revit and here: www.modlar.com/search/products/format--revit

Top