Building Products Questions
Can AA-2 Vapor Shield be installed on top of R-21 Faced insulation.
Have a small entry way. Installed R-21 Faced installed and then found vapor shield from a past job.Will it help or hurt if the shield is placed on top of the R-21 ?
can't open this 3D container dwg in archicad 21
hi there, downloading and unzipping doesn't allow me to see anythung in archicad 21. anything that i can do? any advice appreciated. thanks
Sweet Home 3D compatibility with regards to Shipping Containers
I'm learning a lot, how do I import this into Sweet Home 3D and is it compatible ? Thanks I;m still learning and have started with Sweet Home 3D as it is a lot easier than the complicated product.
how do I insert this file, a skp ffile to revit?
do I create a new family or just copy it?
How do you edit the partition walls off of the floor?
How do you edit how far off the floor the partition walls are? I tried but i cannot edit groups to be able to adjust extruded elements in family!
Model is tinted green. Can the color be changed?
Hi Brannon, unfortunately this file one comes in one color.
Do you have any 3D objects that are downloadable for Archicad, Sketchup, or 3D Max?
Hi Kamilah, we do have Archicad and Sketchup files that are labelled as such. The 3D Max files would be harder to find as they would be classified as 'Other'. The two places to find files on Modlar are the Community BIM/CAD Sharing: www.modlar.com/bim-cad-sharing and the Products section: www.modlar.com/products . The products search function...
18" Bosch DW, SPX68U55UC, depth with handle
Hi, I need to know the depth of this dishwasher with the handle. There is a CAD drawing available but it is not to scale. Thanks, Amanda
Hi Amanda, in that case it might be best to ask Bosch directly, they have a service page here: https://www.bosch-home.com/us/service . I hope that helps! 2 More Answers
Hi, can you please find me concrete ridge tiles and hips targets that can be used in Revit cad and rendering.
I can't find concrete ridge tiles in any Bim library platform.
Hi Percy, I have had a search around our products and community BIM page, but unfortunately there aren't any ridge tiles and hips targets with Revit files.
What method should be used to install a kickplate?
I am looking into installing an 8" stainless kickplate on a 20 minute Marshfield Signature Series fire door. What method should I use, screws, nails, adhesive etc. I can only find literature that states that it must be less than 16" from the bottom of the door.
Where can I get the LEED documentation on this product?
Hi Courtney, this would be a good question to ask the manufacturer directly. You can contact the company here: https://www.echelonmasonry.com/about/contact-us .
How can I download this?
Hi Leon, unfortunately this brand does not have any BIM/CAD files for their products. The easiest way to find products with the right files is to do a search and then use the 'Formats' filter to tick the relevant file formats. You can search for a particular product or even do a blank search like this: https://www.modlar.com/search and then t...
can i download model of bmw car to use in my model?
I tried to download the model but i cannot open (its zip file) and whatever i do this file disappears
Ohhh so sorry for late replay :( Thank you so much Br, Marija 1 More Answer
How to download this a Revit Family?
Hi Thabo, Unfortunately this brand does not have any BIM/CAD files for their products.
Can I download this as a revit family?
I think like same but possible if you not use fum but you can make it in carpet option. 1 More Answer
can this be uploaded on revit?
Hi Sadie, this BIM object is not available in Revit unfortunately.
Greetings....how does one make openings on this container?
archicad
Hello I just signed in your website.
My question is why I cant download this BIM product?
Hi Mehmed, this product does not have any BIM/CAD files, so first you have to make sure the product you are looking at has the right files to download. The easiest way to find products with the right files is to do a search and then use the 'Formats' filter to tick the relevant file formats. You can search for a particular product or even do...
Hi, How can I download the Revit models? when I downloaded something it was just an image. Thank you!
Hi Shahrzad, not every product has BIM/CAD files, so first you have to make sure the product you are looking at has Revit files to download. The easiest way to find products with Revit files is to do a search and then use the 'Formats' filter by ticking 'Revit'. Here is an example using a blank search: https://www.modlar.com/search/products/f...
I am looking for a Revit download for this product.
Hi do you have a revit .rvt file for it? Thanks
Hi Jyoti, unfortunately the manufacturer of this door has not created an Revit files yet.
Is there a revit family that contains this door?
Hi Aldo, unfortunately the manufacturer of this door has not created an Revit files yet.
Need to know if Bilco Type Q - Angle Frame Access Door is 1 hr. rated?
Hi John, the best way to find out is to contact the manufacturer directly. Here is the email address for Bilco Company: commercial@bilco.com .
May I load some of your revit items? I do like the natural items.
Interest in the table, light fixture and wood veneer. Could I be allowed to share these within my class? Your fixture seems to have a good light source within and the wood veneer has a good scale to work with. I do not attend to change the light fixture in anyway no... Read More
Hi Kendra, the Community BIM page where this object is was designed for users to share their BIM/CAD files, so feel free to download and use them as you like!
Can this family be placed in a titleblock family ?
Can this family be placed in a titleblock family ? I did this and then all the parameters from the scale bar family did not appear on the titleblock once it was loaded into the project. I am trying to have a parametric scale bar on a title block that I can control o... Read More
Do you have other I beams and Channels, angles for Fiberglass material ??
Hi Llz, Thanks for reply. 1 More Answer
How do I download your products into my "REVIT" projects??? I need 3D drawings of the products, Hope you can help>
Hi Richard, unfortunately the product you are viewing has no Revit files attached to it. To find products with Revit files, you can do a product search and then find the 'Formats' filter on the left hand side. Here is a search for garage doors with Revit: https://www.modlar.com/search/products/format--revit/query/garage%20door . You will see...
Tejas Espana Clay tile. Looking for a manufacture that carries a particular color
I need to match the color of a clay tile. Currently the back of the tile says T024A. can any one help since the supplier we had has stopped making it? We need to order enough for 3000 sf.
How can I find the same cars that are compatible with Revit Archilecture 2009 .
Have downloaded most of these cars but none is compatible with my Revit Architecture 2009. Please help !
I don't know if the user still has problem loading this specific file, but I was able to load it. here is the steps taken. 1) download file. 2) go to the location where you saved the file on your device. 3) unzip the folder. 4) open the unzipped folder and there is another folder that you have to unzip. 5) unzip any other folder that might be... 1 More Answer
ı m looking for 3d in revit
Hi Oznur, this product does not have any BIM/CAD files. I did a search for vanities with Revit files, but unfortunately nothing came up. We do add new products every week, so hopefully there will be some in the future.
Empty downloaded zipped folders.
I have tried several times over and over again to download the same files without any luck. What is the cause thereof ?
Hi Percy, I have downloaded the file and once I unzip the file twice it works. You might have to manually change the name of the file though, as there are some words at the end after .rfa that could be causing problems.
How can I download the Sketchup file?
When I download the Sketchup 3D Model, there's .vwx file in the archive? Could you please fix it? Thanks!
Can I change the length of the text?
I see that I can change the radius of the curve, but can I change the length of how long I would like that curve to be?
hi im new here, where do I find my folder with downloaded GDL objects
do I get GDL library-object for archicad ?
Hi Peter, the product you saved to your folder doesn't have any BIM/CAD files attached to it. The first step to download ArchiCAD files is finding products with the right format, which you can do by searching for the product type and then ticking 'ArchiCAD' under the formats filter on the left hand side. Here is a blank search that will show...
how do i add this file to my archicad library after downloading and extracting it ?
Producers of prefabricated wall elements?
Good Afternoon. I am working on the project. Case - construction of public facility with prefabricated elements of wood and concrete. I am doing the analyses, therefore my question is: Do you know good source/producer website to see tested products (with some drawin... Read More
how can i change the dimension of this object in revit
Hi Hesam, For a general tutorial on how to change dimensions, you can have a look here: https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/CloudHelp/cloudhelp/2016/ENU/Revit-DocumentPresent/files/GUID-575DC14F-5571-4BB5-ACF3-991A8F49758F-htm.html . Or if you think there might be something wrong with this file, please let...
