Model 425 Dryerbox - 2x6 wall
Category :
One Model 425 Dryerbox® - 22 Ga. deep drawn recessed dryer vent box with gas port, measures 4 1/4 inches deep from nailing flange. Mostly for 2x6 construction but will also fit into a 2x4 wall that has been firred out with one 1x2 firring strip.
22 gauge aluminized steel weighing 4.14 pounds each
Top port measures 4 1/8" with very slight oval shape
Distance from nailing flange to rear of box is 4 1/4"
Overall measurements: 21" h x 12 1/2" w x 5 1/8" deep
Inside measures 9 1/2" wide x 18 1/4" tall
Five units per carton, 36 cartons per pallet, ships as a class 70
22 gauge aluminized steel weighing 4.14 pounds each
Top port measures 4 1/8" with very slight oval shape
Distance from nailing flange to rear of box is 4 1/4"
Overall measurements: 21" h x 12 1/2" w x 5 1/8" deep
Inside measures 9 1/2" wide x 18 1/4" tall
Five units per carton, 36 cartons per pallet, ships as a class 70
Related Products
About the Brand
In the past, homeowners had to put up with the inefficient venting of their dryer appliance exhaust due to numerous friction causing bends or kinks in the flex duct hose that connects the dryer to the wall exhaust pipe. Lint build-up and a fire hazard are the unwelcome bi-products of these annoying bends. In order to accommodate these flow restrictive bends, the dryer appliance had to be located five to six inches away from the wall, taking away from valuable living area.
Today, you can place the dryer flush to the wall without crushing the exhaust hose or restricting airflow.
Today, you can place the dryer flush to the wall without crushing the exhaust hose or restricting airflow.
More Products from Dryerbox by In-O-Vate Technolo...
Ask Community