LiquiDam EZ™ Moisture Mitigation

LiquiDam EZ™ is a 1-part, highly-engineered, polymeric emulsion moisture mitigation formula. It is formulated to be applied to damp or new concrete, as little as 48 hours old with a moisture vapor emission rate (MVER) less than or equal to 25 lbs. per 1,000 ft2 per 24 hours (0.12 kg/m2 per 24 hours) or a maximum relative humidity of 100%. It is also designed to reduce the MVER from 25 lbs. to 3 lbs. per 1,000 ft2 per 24 hours (0.015 kg/m2 per 24 hours).

• Direct application onto green concrete up to 100% RH
• 1-part, simply hand stir before use
• No primer required, before the application of surface preparation products
• No waste and no special handling required
• Mechanical preparation, such as shot blasting, may not be required, especially for clean, sound concrete
• Can be installed over burnished concrete
• Same day flooring installation - dries within 4-5 hours
• Less than 0.10 Perm Rating (ASTM E96)
• Low VOC. Contributes to LEED® project points
• 5 U.S. gallon plastic pails (18.93 L)