FPS Sprinkler Pumps - Turf Boss
Brand :
Category :
The Turf Boss excels when used to supply water to a timer operated irrigation system, but the rugged, easily serviced pump can be used in other areas as well. Some of which are residential water transfer, commercial dewatering, rainwater drainage, light agricultural irrigation, sump drainage, and industrial liquid transfer. As a premium self-priming sprinkler pump the Turf Boss is approved for indoor or outdoor operation through CSA and UL.
Whether it is a sprinkler system, a construction site, or a water transfer tank, when moving high volumes of water the Turf Boss guarantees the right amount of water right on time.
Features:
Self-priming design, with the ability to lift water from a depth of 25'
Easily serviced through a back pull-out design, which leaves the all plumbing and both the pump's base and case undisturbed in their original location
Rugged pump case constructed with heavy-duty cast iron ensures optimum durability, quiet operation, and long life
Hydraulic components molded with Noryl®* thermoplastic, when coupled with the floating stainless steel impeller eye-seal, ensures dependable and efficient operation
Available with a 304 stainless steel impeller for maximum durability
Industry proven indoor and outdoor 56J motors from A.O. Smith
Single-phase: 1 and 1.5hp motors are dual voltage, set to run with either 115 or 230V incoming power (2hp is 230V only)
Available in all horsepowers with a three-phase A.O. Smith Motor
Mechanical shaft seal allows positive protection against leaking
Built-in drain plug for easy winterizing and servicing
Shut-off pressures up to 130 feet, and flow rates to 70 gpm
Handles water temperatures up to 120°F
Integral 1" NPT priming plug
1-½" FNPT suction, 1-½" FNPT discharge
Whether it is a sprinkler system, a construction site, or a water transfer tank, when moving high volumes of water the Turf Boss guarantees the right amount of water right on time.
Features:
Self-priming design, with the ability to lift water from a depth of 25'
Easily serviced through a back pull-out design, which leaves the all plumbing and both the pump's base and case undisturbed in their original location
Rugged pump case constructed with heavy-duty cast iron ensures optimum durability, quiet operation, and long life
Hydraulic components molded with Noryl®* thermoplastic, when coupled with the floating stainless steel impeller eye-seal, ensures dependable and efficient operation
Available with a 304 stainless steel impeller for maximum durability
Industry proven indoor and outdoor 56J motors from A.O. Smith
Single-phase: 1 and 1.5hp motors are dual voltage, set to run with either 115 or 230V incoming power (2hp is 230V only)
Available in all horsepowers with a three-phase A.O. Smith Motor
Mechanical shaft seal allows positive protection against leaking
Built-in drain plug for easy winterizing and servicing
Shut-off pressures up to 130 feet, and flow rates to 70 gpm
Handles water temperatures up to 120°F
Integral 1" NPT priming plug
1-½" FNPT suction, 1-½" FNPT discharge
Related Products
About the Brand
Welcome to Franklin Electric, the world's leading global provider of complete water and fueling systems. We are comprised of the industry's most extensive lines of water and fueling system solutions.
Ask Community