SHR14105R - Heat Recovery Ventilators
The SHR 14105R Commercial Heat Recovery Ventilation system (HRV) complements today's tight buildings. Fantech Heat Recovery Ventilators (HRV) are designed to supply air into a building while exhausting an equal amount of contaminated air to the outside. The aluminum heat exchanger core transfers sensible energy between air streams resulting in tempering of the supply air and reduced loads on the HVAC system.
During the defrost sequence, a motorized damper temporarily blocks the incoming fresh air stream so that the warm air from the building can circulate through the HRV. The exhaust blower shuts down and the supply blower switches into high speed to maximize the effectiveness of the defrost strategy.
Airflow up to 1430 cfm @ 0.4" PS
Push-pull configuration
External low voltage contacts
Dual service doors & reversible electrical box
External three position switch (Low/Standby/Medium)
During the defrost sequence, a motorized damper temporarily blocks the incoming fresh air stream so that the warm air from the building can circulate through the HRV. The exhaust blower shuts down and the supply blower switches into high speed to maximize the effectiveness of the defrost strategy.
Airflow up to 1430 cfm @ 0.4" PS
Push-pull configuration
External low voltage contacts
Dual service doors & reversible electrical box
External three position switch (Low/Standby/Medium)
Related Products
About the Brand
For more than 2 decades, Fantech has been researching, designing and bringing to market "Ventilation Solutions" that ensure better indoor air quality in the buildings where we work and live.
Core products include
Inline fans for bathroom exhaust, dryer boosting and radon mitigation.
A full line of indoor air quality equipment such as Heat Recovery and Energy Recovery Ventilators and Whole House Hepa Filtration.
Larger CFM fans for commercial applications such as Inline Centrifugal Fans for Round, Square and Rectangular Duct, Exterior Mounted Centrifugal Fans for Wall and Roof, Multi-Port Centrifugal Fans and Air Curtains.
Since its founding in 1987, Fantech has focused on becoming a leader in the air movement/ventilation industry.
Fantech's two North American manufacturing plants include a 155,000 sq. ft. facility in Lenexa, Kansas, USA as well as a 130,000 sq. ft. manufacturing plant located in Bouctouche, New Brunswick, Canada.
Core products include
Inline fans for bathroom exhaust, dryer boosting and radon mitigation.
A full line of indoor air quality equipment such as Heat Recovery and Energy Recovery Ventilators and Whole House Hepa Filtration.
Larger CFM fans for commercial applications such as Inline Centrifugal Fans for Round, Square and Rectangular Duct, Exterior Mounted Centrifugal Fans for Wall and Roof, Multi-Port Centrifugal Fans and Air Curtains.
Since its founding in 1987, Fantech has focused on becoming a leader in the air movement/ventilation industry.
Fantech's two North American manufacturing plants include a 155,000 sq. ft. facility in Lenexa, Kansas, USA as well as a 130,000 sq. ft. manufacturing plant located in Bouctouche, New Brunswick, Canada.
More Products from Fantech
Ask Community