100LF Stabilisers

Brand :

Aercon

Category :

HVAC

Product URL :

http://www.aercon.com/productstypelf03.html

To select the appropriate 100LF stabiliser for your application:

Determine operating pressure

Select the flow factor from the table opposite

Divide the flow in m3/s by the flow factor.

Multiply the answer by 320 to give the required total blade size in linear millimetres

Divide the total by 1, 2, 3 or 4 as appropriate to give individual blade size.

Standard blade lengths :- 200, 250, 260, 300, 330, 380, 430, 470, 520, 550, 610, 650, 680, 720, or 750mm.

Example - 0.22 m3/s @ 22 Pa. Flow factor (from table opposite) = 0.089

Formula : 0.22/0.089 x 320 = 791 (theoretical blade length in mm)
As this is greater than the largest single blade, divide by 2 and round up to the nearest standard size which will indicate a 100 LF430/2 stabiliser.

Materials

Stainless Steel

CSI Divisions

23 05 23 General-Duty Valves for HVAC Piping

About the Brand

Aercon

Aercon, a division of the Power Utilities Group, has over 50 years of experience in the design and manufacture of Air Pressure Control Valves and Air Pressure Stabilisers.

Aercon design and manufacture Air Pressure Control Valves and Air Pressure Stabilisers that are used in in hospitals, operating theatres, clean rooms, for gas fire supression and protected fire routes as well as many other indutrial applications.

Aercon Air Pressure Control Valves and Air Pressure Stabilisers are used throughout the world.

Applications and Sales

Aercon offer FREE computer aided design assistance for operating theatre, clean room and protected escape route applications working to all relevant standards ie HTM 03-01, HTM 2025, HBN4, HBN13, ISO14644-1 and BS EN12101-6 2005. Aercon also offer technical seminars for consulting engineers.