I have a model that was started a few months back and the loor levels were never changed from the default (i.e. Level 1 = 0"). Is there a way to move the entire model up so Level 1 = 100'-0"?
I think the best way to do is moving the whole model in one action to do this follow the next points: 1- Open an "elevation view" (north, east or any of that, even a section) 2- Go to "Manage" 3- at the "Project Location" on manage click on "Position" tab and choose "Relocate Project" 4- Now click on any place and move (like when you move an object) to the desired position i.e 100' in the Z direction of the project. 5- You will not notice any change, to get this you need to edith your "level family" and change the elevation base to "shared" this will change you current 0' 0" to 100' 0" 6- Do this also for your "spot elevations" select one spot elevation and click edit type, then go to "elevation origin" and change from project to "shared" this will update all your spot elevations since they're a family. Don't forget to create a backup, just in case... Hope this helps. Fredy